Product Description:

The ADP164C-B35OB1-BS0H-B2V1 three-phase induction motor is produced by Bosch Rexroth Indramat within the ADP 3-Phase Induction Motors series. This AC machine serves as the primary mover in automated lines, converting inverter-supplied power into continuous rotation for material-handling axes, tooling spindles, and packaging equipment. Integrated servo feedback allows the motor to report position and speed to the drive controller, which supports accurate torque regulation during changing load conditions. That feedback arrangement also helps the connected drive respond quickly to speed corrections during starts, stops, and steady-state operation.

Mechanical durability is increased by reinforced bearings, which tolerate higher radial and axial loads during rapid acceleration. An independent blower that operates at 230 V maintains stable winding temperature so the rated output can be sustained at low shaft speeds. Installation uses flange or foot mounting, allowing the frame to fit either IEC or proprietary machine layouts. Closed-loop position data are transmitted through Heidenhain servo feedback, giving high-resolution signals that support tight velocity and torque loops. Power is delivered through a shaft cut with a whole parallel key, which provides positive mechanical engagement to couplings or pulleys without relying on friction alone.

The frame code 164 indicates the stator diameter used for this motor size and is paired with the C-length housing. Because there is no shaft seal at the output end, the motor is intended for clean, dry environments or for installations where an external seal is built into the machine. With no brake installed, holding torque must be supplied by the drive or by an external mechanical lock when power is removed. Dynamic balance conforms to R vibration severity, which helps limit transmitted oscillation to connected machine elements at rated speed. Electrical terminations follow direction B, and the terminals are positioned on the top of the housing so cable routing can remain direct in enclosed machine spaces.