Product Description:

The ADP164C-B05OB6-BS0H-A2N1 three-phase induction motor comes from Bosch Rexroth Indramat and belongs to the ADP 3-Phase Induction Motors series. As an asynchronous drive element, the unit converts electrical power into rotational motion for conveyors, packaging stations, and other continuous-duty axes in automated cells. The ADP platform provides mounting and feedback options that let a matched drive controller regulate torque, speed, and thermal performance for industrial motion systems. This arrangement makes it suitable for steady-speed and controlled-speed duties where reliable rotary output is required over long operating periods.

Mechanical construction uses standard bearings, which support the radial loads expected for this motor size. A flange-mounted housing enables direct attachment to gearboxes or machine frames without foot adapters, which helps maintain alignment. The motor length C provides the active iron needed for the motor's thermal rating, and the frame size is 164, which corresponds to the outside diameter and bolt circle used by ADP accessories. The motor has a smooth shaft, so couplings or pulleys can be press-fit without keyways, which helps minimize imbalance. No brake is installed, so stopping torque must be provided by the drive or external mechanics.

Control accuracy is enhanced by servo feedback (Heidenhain), which returns position and speed data to the inverter for closed-loop regulation. Power enters through a top connection, which supports overhead cable routing and keeps side clearance open near adjacent equipment. There is no shaft seal, so the installation site must prevent fluid ingress along the rotor journal. Dynamic loading remains within vibration severity level R, which limits permissible imbalance and bearing stress during operation. The B-side connection direction places the motor leads toward the fan end when the flange faces the operator.