Product Description:

The ADP164B-B35OA1-DS0H-D2N1 is a three-phase induction motor manufactured by Bosch Rexroth Indramat and supplied as part of the ADP 3-Phase Induction Motors series. This rotating machine is intended for drive axes in automated lines, where it converts electrical energy into continuous mechanical rotation so the inverter can regulate speed and torque to match process demands. It is designed for direct connection to standard inverter outputs and does not require separate field excitation.

This model uses standard bearings to accommodate typical radial and axial forces encountered in couplings or gear stages. A separate cooling fan operates at 230 V, so an auxiliary supply must be provided for thermal control. The motor uses flange or foot mounting, so the same frame can fit vertical or horizontal layouts. Closed-loop operation is enabled by Heidenhain servo feedback, which supplies high-resolution position data to the drive controller. Dynamic imbalance is limited to the ISO class represented by the R vibration severity level, which helps reduce transmitted vibration to connected structures. The DS winding code identifies the stator resistance and inductance used with compatible ADP inverters. Because the motor is supplied without a holding brake, it can coast freely when the stator is de-energized.

The output shaft is fitted with a shaft seal, which blocks lubricant migration and protects the bearing cavity from airborne coolant. Torque is transmitted through a whole parallel key along the output shaft, giving a positive mechanical link to pulleys or couplings. The frame coded as 164 establishes the center height and stator diameter, while the length identifier B fixes the axial stack for medium power within the group. Power conductors follow direction A and exit on the top of the housing, simplifying cable routing in crowded cabinets.