Product Description:

Bosch Rexroth Indramat's ADP164B-B35OA1-DS0H-B2N1 is an AC induction motor in the ADP 3-phase induction motors series. Designed for continuous duty in automated machinery, the unit converts three-phase electrical power into rotational motion for pumps, gantries, and material-handling stages. Its construction follows a standardized industrial platform, so the motor can be used with matched Rexroth drives for closed-loop speed regulation in production cells.

The stator frame corresponds to the 164 frame size, giving the motor a larger magnetic cross-section for higher torque density than smaller ADP units. Rotor position is reported through Heidenhain servo feedback, allowing the drive to read absolute position and make real-time current corrections. An auxiliary fan powered at 230 V moves cooling air across the housing to maintain winding temperature during continuous operation. The housing supports flange or foot mounting, so the motor can be bolted to a face plate or a base without adapters. Torque is transmitted through a shaft machined with a whole parallel key, providing positive engagement with couplings. Because the motor has no brake, holding torque must be supplied by the drive or an external mechanical lock during standstill.

The motor uses vibration class R, which limits displacement amplitudes in applications that demand low structural resonance. Protection against fluid ingress is limited because there is no shaft seal, so the motor should be mounted in clean, dry locations. Internal support is provided by standard bearings lubricated for the expected service life, and the laminated core uses winding code DS for its electrical characteristics. Length code B indicates the active stack height, while power conductors exit upward because direction A locates the connection box on the top of the frame, simplifying vertical cabinet runs.