Product Description:

The ADP164B-B35OA1-DS0H-A2N1 is a 3-phase induction motor produced by Bosch Rexroth Indramat and supplied within the ADP 3-Phase Induction Motors series. It combines a 164 frame size with a B-length stator core, and its power conductors exit in direction A at the top of the housing to simplify vertical cabinet runs. Used as a main drive in automated material-handling or machining cells, the unit converts inverter-supplied AC power into continuous rotary motion for gearboxes, belt pulleys, or direct-coupled loads. When paired with a suitable inverter, it supports steady operation in systems that require controlled speed and continuous torque during repeated production cycles.

The integral cooling fan is energized from a dedicated 230V source, so the motor’s thermal performance is maintained independently of the drive output. For mechanical integration, the housing supports flange or foot mounting, allowing either direct face mounting to gear reducers or base mounting to slide rails. Rotor position feedback is provided through Heidenhain servo feedback, giving the inverter precise speed and vector information during closed-loop control. A smooth shaft eliminates keyways that could cause stress concentrations, which is useful for shrink-fit or clamp-hub couplings. Because the motor has no shaft seal, the installation area must remain free from coolant splash or abrasive dust to reduce the risk of ingress along the journal.

Standard axial and radial loads are handled by standard bearings, and the motor is assigned vibration severity level R. Stopping torque is not provided internally, and the motor is supplied with no brake installed, so external holding or dynamic braking must come from the drive or the machine mechanics. The stator’s electrical layout uses winding code DS, which is matched to typical ADP drive modules. The B-length core and top-side power entry support compact installation while keeping cable routing straightforward in medium-inertia industrial axes.