Product Description:

The ADP164B-B05OB2-DS0H-E2N1 induction motor is produced by Bosch Rexroth Indramat within the ADP 3-Phase Induction Motors series. As a three-phase asynchronous machine, it converts inverter-fed electrical power into rotary motion for automated transport lines, pumping stations, and material-handling systems. It is intended for applications that require continuous torque and controlled speed without an integrated gearbox or holding brake.

The motor uses a flange-mounted face so the housing can seat directly against a gearbox or machine plate. Its motor size 164 indicates the frame size used for installation and thermal capacity. Internally, standard bearings support the radial and axial loads expected in horizontal mounting positions. The motor has no brake installed, so any holding function must be provided by the drive or by external equipment. A shaft seal helps limit lubricant escape and reduces contamination entry. Forced-air cooling is supplied by a dedicated blower that operates on 230 V, helping the motor maintain winding temperature during low-speed operation. Closed-loop control is supported by Heidenhain servo feedback, which provides position data to the drive controller.

The motor has a motor length B stack, which provides the active iron length used for this frame size. Balance quality is identified as vibration severity level R, which helps reduce transmitted vibration to the connected machine structure during operation. Electrically, winding code DS identifies the winding arrangement used for this motor, allowing a compatible inverter to apply the proper current limits during acceleration and steady-state operation. This combination of mounting style, cooling method, feedback, and winding layout makes the motor suitable for controlled industrial drive tasks where stable speed regulation and repeatable operation are required.