Product Description:

The ADP134D-B35OB1-CS0H-D2N1 is a three-phase induction motor produced by Bosch Rexroth Indramat as part of the ADP 3-Phase Induction Motors series. Within an automated cell, the unit supplies continuous rotary motion that can be scaled by a frequency inverter, making it suitable for conveyors, extruders, processing spindles, and other variable-speed machinery. Its asynchronous design supports high efficiency over a broad load range, and the integrated Heidenhain feedback channel lets the drive controller monitor speed and slip for precise closed-loop regulation during changing process conditions.

Its blower is energized by a cooling supply of 230 V, so external line power can be routed directly to the fan without additional transformers, maintaining constant airflow across the stator even at low shaft speeds. Position and velocity data are transmitted through the integrated Servo Feedback interface from Heidenhain, allowing the controller to compensate for load variations in real time. Installation flexibility comes from a housing that supports flange or foot mounting, enabling either C-face coupling to gearboxes or base mounting on a machine frame. The frame designation of 134 identifies the stator diameter, while length code D adds extra active iron for higher continuous torque.

Power conductors enter from the top of the terminal box, and their orientation is direction B, which simplifies cable runs inside overhead ducts. The output shaft is machined with a whole parallel key to transmit torque to pulleys or couplings without slip, and it is supplied with a shaft seal that guards the front bearing cavity against coolant and dust. Inside, standard bearings carry radial and axial loads up to vibration severity level R used for this motor. Because the unit ships with no brake installed, external stopping methods are required when zero-speed holding is needed, and the absence of a braking package keeps inertia and overall length low.