Product Description:

The ADP134D-B35OA1-CS0H-D2N1 is a three-phase induction motor engineered by Bosch Rexroth Indramat for the ADP 3-Phase Induction Motors series. As a squirrel-cage drive element, it supplies continuous rotary power to automated transport, printing, and machining equipment that operate from inverter-based supplies. Because it is built for inverter operation, it can support variable-speed duty in production equipment that requires controlled acceleration and stable running. The unit is intended to provide reliable torque production where encoder-based speed feedback is required for closed-loop control.

Its thermal management uses a cooling fan powered by 230 V, allowing the stator to maintain rated temperature under continuous load. Mounting versatility is achieved through a flange or foot-mounted frame that can be fastened to vertical or horizontal machine plates. The motor has a size of 134 and a stator stack length code of D, which indicate the active iron volume available for torque production. Rotor position is monitored through Heidenhain servo feedback, permitting the connected drive to regulate current vectors precisely. Standard bearings carry radial and axial loads, and the power conduits enter from the top in direction A.

For mechanical coupling, the shaft is machined with a full parallel key and fitted with a shaft seal to limit lubricant escape and contaminant ingress. Dynamic behavior is classified under vibration severity level R, which suits machines that tolerate moderate vibration while supporting bearing life. The stator winding follows code CS, which indicates the current limits and thermal model used by the matching drive. No brake is installed, so holding torque must be provided externally when the drive is disabled. The absence of an auxiliary brake also helps keep overall inertia lower for faster speed changes.