Product Description:

The ADP134D-B35OA1-CS0H-A2N2 is a three-phase induction motor manufactured by Bosch Rexroth Indramat within the ADP 3-Phase Induction Motors series. It supplies rotary power to conveyors, gantries, and material-handling axes in automated production cells, and it can operate with constant or vector control. When paired with a Heidenhain servo feedback encoder, the drive controller receives precise rotor position data for closed-loop speed regulation. This arrangement helps the drive maintain stable output during load changes and routine speed adjustments. It is suitable for general industrial automation that requires repeatable speed control and coordinated axis response.

To support thermal management, the stator windings are designed for a cooling blower voltage of 230 V, which powers the internal fan. The motor uses frame size 134 with length code D, giving a housing and active length suited to mid-range drive axes. Electrical behavior is set by winding code CS, which matches the motor’s phase characteristics to compatible Rexroth inverter parameters. All power conductors use a top cable exit, and connection direction A points them toward the drive cabinet to keep routing direct and organized. Standard bearings carry radial and axial loads, and vibration severity level S supports general-purpose industrial mounting.

The motor is supplied with no brake installed, so any holding function must be provided by the connected drive or an external clamp. A smooth shaft supports coupling to gearboxes that use shrink disks or hubs, and the absence of a key helps reduce localized stress during frequent starts. Because the motor has no shaft seal, it is best suited to clean installation areas that are free of process fluids or abrasive dust. The housing allows flange or foot mounting, giving flexibility when placing the motor on conveyor frames or vertical axis structures.