Product Description:

The ADP134D-B05OB1-ES0H-A2N1 is a three-phase induction motor produced by Bosch Rexroth Indramat for the ADP 3-Phase Induction Motors series. It supplies continuous rotary power to automated conveyors, indexing tables, and other motion axes used in industrial assembly or material-handling lines. Designed for inverter operation, the motor integrates with closed-loop drive packages to deliver commanded speed and torque. Its power leads exit on the top of the frame, which helps simplify cable routing inside machine enclosures.

The motor uses a 134 stator diameter and length code D, which set its thermal capacity and mounting depth. Mechanical attachment is provided by a flange-mounted housing, allowing direct coupling to gearboxes or machine plates without foot adapters. Cooling air is supplied by an auxiliary blower that operates on 230 V, helping keep the windings within their operating limits during extended low-speed operation. Rotor position is monitored through Heidenhain servo feedback, enabling the inverter to regulate slip and detect load changes in real time. A smooth shaft supports clamp couplings, and because the motor has no brake installed, an external brake is required when holding torque is needed. The power connection follows direction code B, which places the terminals at the top of the stator.

Operational life is supported by standard bearings that accept the radial and axial loads generated by belt drives and couplings. Because the motor has no shaft seal, it is intended for dry environments where coolant or oil spray is absent. Dynamic balance conforms to vibration severity level R, which helps limit displacement that could affect nearby precision devices during operation. Electrically, winding code ES corresponds to the stator resistance and inductance pair recognized by matching Bosch Rexroth drive parameters, supporting correct current limiting and flux control.