Product Description:

The ADP134D-B05OB1-CS0H-A2N1 is an induction motor produced by Bosch Rexroth Indramat for the ADP 3-Phase Induction Motors series. As an asynchronous drive element, it converts three-phase electrical energy into rotational motion for conveyors, machine tools, and other automated axes that do not require intrinsic position holding. The design uses the series’ standardized housing, length code D, and frame size 134 to fit directly onto flange plates in multi-motor assemblies without additional adapters.

The motor is flange-mounted, so the housing face carries the full mechanical load instead of foot pads, which simplifies alignment on gearboxes or actuator frames. Internal fans run from a dedicated cooling supply of 230 V to move air across the stator and prevent thermal saturation during continuous duty. Lubrication is handled by standard bearings, selected for general-purpose loading ranges and normal maintenance intervals. A smooth shaft is provided to interface with user-selected couplings, which can reduce fretting that may occur with keyed connections. For stop-and-hold functions, the unit ships with no brake installed, so external clamping or drive torque must secure the load when power is removed. Winding code CS identifies the copper gauge and coil pitch, and power conductors enter through connection direction B on the terminal box.

Rotor position data is returned through Heidenhain servo feedback, allowing vector drives to calculate slip and maintain constant torque under variable speed commands. The motor has no shaft seal, which limits it to clean, dry environments where oil splash or coolant washdown is not expected. The power leads exit from the top of the housing, keeping cable trays above the machine bed and away from metal chips. Dynamic balance follows vibration severity level R, which helps maintain acceptable running characteristics without additional damping hardware.