Product Description:

The ADP134D-B05OA1-CS0H-A2N1 induction motor is produced by Bosch Rexroth Indramat and belongs to the ADP 3-Phase Induction Motors series. As a three-phase AC machine, it converts electrical power from matched drives into controlled rotary motion. It is suited for conveyors, gantry axes, and other continuously running equipment in automated plants. This type of motor is commonly paired with inverter control where steady rotation and predictable response are required through long operating cycles.

The motor uses a flange-mounted housing with size code 134, so it can be fastened directly to a machine plate without separate feet while keeping the rotor centerline aligned with standard ADP interfaces. A smooth shaft exits the drive end, allowing coupling hubs or pulleys to be installed by clamping rather than keying when accurate balance is needed. Position and speed data are returned through Heidenhain servo feedback, which provides high-resolution signals to the inverter for closed-loop regulation. Stator cooling is supplied by a dedicated fan that operates on 230 V, helping the motor maintain stable temperature during continuous duty. The unit has no brake installed, so an external method is required to hold the load when power is removed.

Drive endurance is supported by standard bearings sized for the D-length rotor, and the motor is built to vibration severity level R to keep running motion stable. Because there is no shaft seal, the mounting area should remain free of process liquids that could reach the bearing lubricant. Incoming power is routed through A-oriented connectors positioned on the top of the terminal box, which can simplify cable routing when control cabinets are located above the motor. The connector placement can also reduce cable bending above the terminal box in vertical machine layouts. The CS winding code corresponds to the electrical values used by compatible drives with this D-length construction.