ADP134C-B35OB6-DS0H-B2N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911294938
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat ADP134C-B35OB6-DS0H-B2N1 is part of the ADP 3-Phase Induction Motors series and features standard bearings with no brake installed. This motor uses servo feedback from Heidenhain, is flange or foot mounted, and has a whole parallel key shaft configuration. The power connection is located at the top, and it has vibration severity level R.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ADP134C-B35OB6-DS0H-B2N1 is an AC motor manufactured by Bosch Rexroth Indramat and supplied within the ADP 3-Phase Induction Motors series. In automated cells, it supplies continuous rotary motion for conveyors, extruders, and similar loads that require fixed-speed operation from a fixed-frequency mains supply. Because the motor integrates servo-grade feedback, it can also be paired with vector drives when tighter speed regulation is needed on production lines. This combination lets the unit handle conventional induction-motor duties while still supporting feedback-based control when the process needs steadier speed under changing load.
This unit is built with standard bearings that support radial and axial loads typical of general-purpose machinery. The frame code 134 indicates a large stator diameter that permits higher thermal dissipation, while the axial build size C adds active iron length for additional torque. A factory-installed Heidenhain servo feedback encoder returns absolute rotor position to the drive for closed-loop control. That feedback arrangement helps the control loop monitor rotor position directly instead of relying only on motor slip. Vibration classification R confirms industrial balancing that limits displacement during full-speed running. Output torque reaches the shaft through a whole parallel key arrangement, allowing straightforward coupling to gearboxes, pulleys, or other driven elements.
The motor has no brake installed, so any holding action must come from the connected drive or a mechanical lock. The housing has no shaft seal, making the motor suitable for clean, dry enclosures rather than washdown zones. It accepts either flange or foot installation, which helps when machine layouts vary. Power leads exit according to direction code B, and the terminals are on the Top of the frame to keep routing clear of the machine base. That placement can also reduce interference with base plates and nearby guarding. Internal copper geometry follows winding code DS, matching the motor’s impedance to compatible Rexroth drives.
