Product Description:

The ADP134C-B35OB2-DS0H-A2N2 is a three-phase induction motor produced by Bosch Rexroth Indramat for the ADP 3-Phase Induction Motors series. The unit converts electrical power into mechanical torque for material-handling stations, packaging lines, and other general automation drives where accurate feedback and consistent speed control are required. It operates with an external frequency inverter that manages current and monitors the integrated feedback device. This arrangement allows the motor to maintain commanded speed and acceleration profiles in multi-axis systems while supporting stable closed-loop operation during repetitive duty cycles.

Inside the laminated stator, the rotor is supported by standard bearings that allow continuous operation with minimal radial runout. An integrated blower uses a 230 V auxiliary supply to force air through the housing and keep winding temperatures within normal operating limits. The motor uses flange or foot mounting, so it can be attached by the flange face or by feet to suit the machine layout. Closed-loop operation uses Servo Feedback (Heidenhain), enabling the drive to read precise rotor position. Frame size 134, together with length code C, gives the motor a thermal mass suited to medium-torque workloads.

Power cables enter according to direction code B, and the terminals are placed on the top of the enclosure to simplify cabinet wiring. The rotor is supplied without a brake, so dynamic stopping must be provided by the inverter or by external mechanics. A smooth shaft simplifies coupling to gearboxes while lowering peak stresses during torque transfer. The motor is supplied with no shaft seal, which suits enclosed installations where contaminants are controlled. According to ISO charts, the motor meets vibration severity level S, which helps reduce transmitted oscillations to surrounding frames. Winding code DS identifies the conductor cross-section and insulation used on the stator coils.