Product Description:

The ADP134C-B35OA1-DS0H-B2N1 is an asynchronous motor manufactured by Bosch Rexroth Indramat within the ADP 3-Phase Induction Motors series. This frame-C machine belongs to a general-purpose induction motor line and is intended for constant-speed or inverter-driven duties in automated material handling, pumping, and forming equipment. By coupling the stator's rotating field to a squirrel-cage rotor, it delivers continuous torque that plant controllers can modulate through the integrated feedback interface for closed-loop operation. This arrangement suits applications that need stable torque together with monitored speed and position signals.

The motor's internal fan is powered from a dedicated 230 V auxiliary line, so thermal management is independent of the main supply and remains effective at low shaft speed. Mechanical integration is flexible because the housing supports flange or foot mounting, allowing the same model to be fastened to gearboxes or baseplates without adapters. A Heidenhain encoder supplies Servo Feedback (Heidenhain) signals that report position and speed for vector-controlled drives. The motor has size 134, which corresponds to the stator diameter and bolt circle used for this frame. Torque is transmitted through a shaft machined with a whole parallel key, giving positive engagement to hubs while preserving concentricity. Because there is no shaft seal, the application must keep oil or coolant away from the bearing region to help prevent contamination of the winding cavity.

The motor uses standard bearings, which suit routine industrial operation under the radial and axial loads typical of this frame size. Motion holding features are not provided, as indicated by no brake installed, so stopping energy must be absorbed by the drive or the load. Dynamic balance corresponds to vibration level R, so the unit can be mounted on typical machine foundations without exceeding common vibration limits.