Product Description:

The ADP134C-B05OA2-DS0H-C2N2 is a three-phase induction motor produced by Bosch Rexroth Indramat within the ADP 3-Phase Induction Motors series. It is intended to supply continuous rotary power to conveyors, gantries, and other automated axes where closed-loop speed regulation is handled by the associated drive controller. In service, the motor functions as the mechanical output element while the matching control electronics manage acceleration, steady-state speed, and load response. Because feedback is returned to the drive, it can also be used in coordinated motion systems that need repeatable speed behavior during changing process conditions. This arrangement suits automated equipment that needs stable rotation over long operating periods.

The motor uses frame size 134 and body length code C, which set its mounting envelope and thermal mass. Winding code DS matches the stator coils to compatible Indramat drives for correct current and voltage scaling, while the external cooling blower operates from a dedicated 230 V supply to remove heat under constant duty. Rotor position is returned through Heidenhain servo feedback, enabling high-resolution velocity control and responsive regulation during changing loads. The housing uses a flange-mounted interface, and the power leads exit from the top of the stator with connection direction A for axial routing toward the drive cabinet. This arrangement helps keep the motor face clear for direct machine mounting.

A smooth shaft is provided for direct coupling to gearboxes or clamp-style couplings without a key. Internal lubrication is supported by standard bearings, and a shaft seal is fitted at the output end to help limit dust or fluid ingress. Dynamic accuracy is aided by vibration severity level S, which supports operation in assemblies that benefit from controlled running behavior. No brake is installed, so stopping and holding torque must be supplied by the drive or by an external mechanism. The shaft arrangement also supports straightforward use with clamping hubs where smooth torque transfer is preferred.