Product Description:

The ADP134B-B35OA1-FS0H-A2N1 is a three-phase induction motor built by Bosch Rexroth Indramat within the ADP 3-Phase Induction Motors series. As a mains-powered rotary actuator, it converts electrical energy into mechanical rotation for conveyors, material-handling axes, and other continuous-duty motion points in automated plants. By incorporating servo feedback (Heidenhain), the motor can be paired with closed-loop drive controllers for speed or torque regulation. This arrangement lets the drive compensate for induction-motor slip during operation. It is intended for industrial motion points that must run continuously with predictable thermal behavior.

This motor uses standard bearings, which support the expected radial and axial loads for the frame without requiring special bearing arrangements. A built-in mechanical retainer is absent, so no brake is installed and stopping torque must come from the drive or an external brake. The housing accepts a cooling fan supply of 230 V, allowing the blower to remove thermal losses at rated current. The motor uses flange or foot mounting, giving flexibility when the machine layout requires either base support or face attachment. Power cable exit is direction A, and the terminals are positioned on top of the stator box to help keep wiring clear of floor debris.

The output shaft is machined as a smooth shaft, so torque is transferred through an external clamping hub or coupling rather than a keyed connection. Because there is no shaft seal, the motor should be used where liquid spray cannot migrate along the journal into the bearing cavity. Dynamic balance conforms to the R vibration severity level, which helps limit transmitted vibration at nominal speed. The stator pack uses the FS winding code, which sets the conductor cross-section and turn count to match standard ADP drive characteristics. The motor has length B and frame size 134, which place it in a larger mechanical envelope suited to continuous industrial duty.