Product Description:

The ADP134B-B05OB1-FS0H-A2N1 is a three-phase induction motor manufactured by Bosch Rexroth Indramat as part of the ADP 3-Phase Induction Motors series. It is intended for continuous duty in automated cells, where it converts electrical energy into rotational torque for conveyors, extruders, and machine tools used in steady production service. The induction design provides the rugged operating behavior expected in industrial applications. Its asynchronous rotor works with encoder feedback so Rexroth drive amplifiers can provide accurate vector-controlled speed regulation and stable process timing.

This model uses standard bearings to support radial and axial loads typical of belt-driven or gear-coupled applications. Mechanical attachment is provided through flange mounting, which lets the stator housing seat directly against a machine frame without separate foot brackets. The motor has a motor size 134 frame, and the B stack length increases continuous torque while keeping the same mounting pilot. An auxiliary blower supplied with 230 V maintains airflow across the cooling fins so rated performance can be sustained at low shaft speeds. Closed-loop operation is supported by Heidenhain servo feedback, which returns position information to the connected inverter.

For direct coupling, the output end uses a smooth shaft, which avoids keyway stress concentrations and supports shrink-fit hubs. The motor has no brake installed, so stopping or holding torque must be supplied externally when the application requires it. Balance quality follows vibration class R, which helps limit running vibration during high-speed service. Winding code FS identifies the electrical and thermal arrangement used in this motor. The motor is supplied without a shaft seal, so it is best used away from oil spray, coolant mist, or abrasive dust that could reach the bearing area.