Product Description:

The ADP134B-B05OB1-ES0H-E2N2 induction motor is manufactured by Bosch Rexroth Indramat as part of the ADP 3-Phase Induction Motors series. It is intended for fixed-speed or inverter-controlled axes where a rugged asynchronous machine delivers continuous torque to pumps, material-handling conveyors, or packaging equipment. By combining a squirrel-cage rotor with matched stator windings, the unit serves as a general-purpose motor in automated lines that require stable mechanical power.

The motor uses several features that shape the mechanical interface and load coupling. The housing follows the motor size 134 frame code, while the rotor stack depth uses the motor length B designator; together these dimensions support the thermal surface area and usable torque range. A flange mounting face with a centering pilot allows direct attachment to gearboxes or machine plates without foot adapters. Output torque is transferred through a shaft that carries a half parallel key, providing positive engagement with pulleys or couplings. Internal rotation is supported by standard bearings, giving normal service life under the stated radial and axial loads. The motor ships without an integral brake, so stopping or holding duties must be managed by the drive or external mechanics.

Additional features support system integration. Cooling air for the external blower is wired for 230 V, simplifying supply connections in control cabinets that already distribute this voltage. Position and speed loops are handled by servo feedback from a Heidenhain encoder, enabling closed-loop operation with Rexroth or third-party inverters. Contaminant ingress at the shaft interface is limited because the unit is supplied with a shaft seal. Dynamic balance corresponds to vibration severity level S, so the rotor meets standard smooth-running criteria and minimizes transmitted vibration into precision frames. The power terminals exit on the top of the stator and are oriented in direction B for straightforward cable routing.