Product Description:

The ADP104D-B05OB2-FS0H-A2N2 is an induction motor manufactured by Bosch Rexroth Indramat for automated machinery. As a member of the ADP 3-Phase Induction Motors series, it converts three-phase electrical power into rotary motion for indexing tables, conveyors, and process pumps in production lines. It works with inverter drives and position controllers on the same platform, supporting controlled speed changes and repeatable motion in medium-duty applications. Because it is intended for automated machinery, the motor also suits repeated start-and-stop cycles where steady torque delivery is required.

The frame corresponds to motor size 104, which matches the IEC mounting footprint used with the specified flange. Its active core uses motor length D, which provides more copper volume and torque capability than shorter versions in the same frame. Installation uses a flange-mounted interface for direct attachment to gearboxes or machine plates without feet. The motor has a smooth shaft, so torque is transferred through shrink-fit couplings or clamping hubs rather than keys. Because there is no brake installed, holding torque must be supplied by an external stop or by the drive during standstill.

Standard bearings support radial and axial loads, and the motor uses vibration severity level S. The stator cooling fan operates from 230 V and removes heat from the winding package, while the motor uses winding code FS. Power conductors enter at the top of the housing and exit toward side B, which helps when the cable entry point is fixed inside the machine. Incremental position data is supplied through servo feedback (Heidenhain), allowing closed-loop control without an added external encoder. This feedback arrangement lets the controller monitor rotor movement directly during speed regulation and positioning tasks. The motor has no shaft seal, so applications that require fluid containment need a separate sealing arrangement.