Product Description:

The ADP104D-B05OB1-FS0H-A2N1 is an AC machine built by Bosch Rexroth Indramat for the ADP 3-Phase Induction Motors series. It serves as a drive element that delivers steady torque to material-handling stations, packaging lines, and other general-purpose machinery that relies on induction motors for long duty cycles. When paired with a compatible inverter, the motor can operate in closed-loop systems where speed is regulated in response to changing load conditions. Its overall configuration suits installations that need dependable motor performance in a compact flange-based arrangement.

The motor’s internal fan operates from a dedicated 230 V source, so cooling remains independent of the main power feed and can continue whenever the control circuit energizes the fan supply. A flange-mounted housing allows direct attachment to gearboxes or machine frames without additional base supports. Position data is provided through Heidenhain servo feedback, giving the drive controller the information needed for accurate speed holding and slip compensation. The load is driven through a smooth shaft, which is suited to clamp-style couplings and avoids the stress concentration associated with a keyway. Because the motor has no brake installed, any required holding function during power loss must be provided by external hardware.

Lubricated standard bearings support the radial and axial loads expected for motor size 104. The winding variant FS corresponds to electrical values matched to compatible drive systems for medium base-speed operation. A vibration grade of R indicates the permissible balance quality for connected rotating parts and helps support smooth running at rated frequency. The D length designation uses an extended stator stack to add thermal mass. Power leads exit toward the rear in direction B from the top of the housing, which can simplify cable routing in enclosed machine layouts. The motor is also built without a shaft seal, which is suitable for dry, dust-filtered installations where added sealing is not required.