Product Description:

The ADP104D-B05OA2-FS0H-A2N2 is an asynchronous three-phase motor produced by Bosch Rexroth Indramat for the ADP 3-Phase Induction Motors series. As a main spindle or auxiliary axis drive, it converts electrical energy into mechanical rotation for conveyors, pumps, and general motion tasks inside automated cells. The design integrates with Rexroth inverter platforms and supplies continuous torque when a feedback-equipped induction machine is used for closed-loop speed regulation in automated handling and process equipment.

Mechanical configuration starts with standard bearings that follow Rexroth duty load ratings for radial and axial forces encountered in transport or tooling equipment. The housing uses flange mounting, so the motor seats directly against a gearbox or machine plate without additional foot brackets, which helps reduce alignment error. The designation motor size 104 sets the stator diameter and bolt circle, allowing interchange with other 104-frame units in the series. A smooth shaft omits keyways to minimize stress concentrations and supports clamp or shrink couplings on high-speed spindles. Position data are provided through Heidenhain servo feedback, enabling the drive to monitor rotor slip and adjust frequency for precise velocity control.

Thermal management relies on a blower wired for 230 V, and the motor uses the medium length D stator stack to increase copper volume for continuous duty. The motor has no brake installed, so holding torque must come from the drive or an external brake during stopping or at standstill. Its electromagnetic setup uses winding code FS, which matches the stator impedance to compatible Rexroth drives for effective current use across the speed range. The lack of a shaft seal reduces friction and suits clean, shielded enclosures, while vibration severity level S indicates standard balancing. Power leads exit upward from the top-side connection in direction A to simplify cabinet routing.