Product Description:

The ADP104D-B05OA2-ES0H-C2N2 is a three-phase induction motor manufactured by Bosch Rexroth Indramat for the ADP 3-Phase Induction Motors series. As an asynchronous drive element, it supplies continuous rotary motion for conveyors, presses, and transfer stations where closed-loop speed regulation is required. The unit is intended to pair with Rexroth inverter systems in general-purpose industrial automation, where stable motor speed and dependable torque delivery are needed during repetitive production cycles.

It uses standard bearings to carry radial and axial loads typical of medium-frame machines, and it is supplied with no brake installed, so stopping torque must be provided by the drive or by an external mechanism. The housing is flange mounted, giving a rigid interface that centers on the machine wall without requiring foot brackets. Forced ventilation is provided by an auxiliary blower rated for 230 V, while rotor position is relayed through Heidenhain servo feedback to support high-resolution current control. The electrical terminals use connection direction A and are placed on the top of the frame to keep cable bends short. The motor has length code D, which corresponds to an extended active core that increases rated power compared with shorter body lengths.

The stator frame size is 104, which sets the mounting pitch and shaft height for compatibility with neighboring ADP models. Output torque is transmitted through a smooth shaft with no keyway, which suits shrink-fit couplings that help minimize imbalance. A factory-mounted shaft seal helps limit grease escape and airborne dust ingress during operation. Dynamic behavior complies with vibration severity level S, supporting installation on precision equipment without extra balancing. Internally, winding code ES uses conductor sizing and thermal characteristics matched to the D-length core for steady operation under continuous industrial duty.