Product Description:

The ADP104C-B05OB4-CS0H-B2N1 is an induction motor manufactured by Bosch Rexroth Indramat for the ADP 3-Phase Induction Motors series. It serves as the drive element for conveyors, gantry axes, and processing stations that rely on inverter-based speed regulation. The motor belongs to a 3-phase product group intended for industrial motion tasks that require stable speed control. Its platform gives the unit a familiar mounting footprint for modular machine layouts.

Thermal management is handled by an internal blower powered at 115 V, which helps keep winding temperature within permissible limits during continuous duty. Installation is direct because the housing is flange mounted, allowing the shaft centerline to align with gearboxes or machinery without intermediate brackets. Rotor position is reported through Heidenhain servo feedback, enabling the inverter to correct slip and maintain commanded speed. Output torque passes through a whole parallel key cut along the shaft for positive engagement with hubs or couplings. The shaft extension has no shaft seal, which lowers friction and is intended for clean, dry environments.

Rotational accuracy is supported by standard bearings that handle the radial and axial forces common in belt drives and indexing tables. The motor has no brake installed, so stopping and holding functions must be provided externally or electrically by the drive. Frame designation 104 indicates the mechanical envelope and stator diameter, while stack length C provides the magnetic path used for power generation. Dynamic balance meets vibration severity grade R, allowing the motor to run on common industrial bases without added damping. Power leads exit upward because connection direction B is located on the top of the housing, which simplifies cable routing in floor-standing cabinets.