Product Description:

The ADP104C-B05OB1-CS0H-D2N1 from Bosch Rexroth Indramat belongs to the ADP 3-Phase Induction Motors series and functions as an AC induction motor for automated machinery. In production lines or material-handling cells, it converts electrical energy into torque and speed so controllers can drive conveyors, pumps, or positioning axes with consistent performance. Internal standard bearings support the rotor and reduce friction during long duty cycles, which helps the motor remain stable during continuous operation. This type of motor is suited to installations that require dependable rotary output across repeated start and stop cycles.

The housing is flange mounted, allowing the frame to bolt directly to a geared reducer or machine wall without foot brackets and helping shorten shaft overhang. Its external blower requires a cooling supply of 230 V, and this auxiliary voltage powers the fan that maintains winding temperature at rated load. Closed-loop motion control is possible because the shaft carries Heidenhain servo feedback, which provides position data to the drive. The motor uses motor size 104 with length code C for medium-torque applications. It has no brake installed, so holding force must come from the drive or an external clamp when power is removed. Power terminals face the B direction and are located at the top of the enclosure, which keeps cabling higher and away from floor debris.

A whole parallel key is machined into the shaft tip to transfer torque without slip during power transmission. The front end is protected by a shaft seal, which helps block lubricant leaks and airborne contaminants from reaching internal components. Dynamic balance meets vibration severity level R, which helps limit transmitted oscillation into precision frames. The electromagnetic package is identified by winding code CS, so the matching drive can apply the correct motor data for operation.