Product Description:

The ADP104C-B05OB1-CS0H-B2N1 is a three-phase induction motor manufactured by Bosch Rexroth Indramat and allocated to the ADP 3-Phase Induction Motors series. Designed for industrial automation cells, the motor converts electrical power into constant-speed mechanical output for conveyors, presses, and packaging axes. Supplied without an internal brake, it fits installations where stopping and holding are handled by the drive or external locking devices. This reduces overall length and simplifies maintenance.

Physical construction starts with the frame size of 104, which sets the stator diameter and gearbox compatibility. Rotor stack length code C provides medium axial dimensions within the series. The motor uses a flange-mounted interface, placing the centering pilot on the motor face for direct coupling to machinery, while power enters through top-side terminals referenced by connection direction B. The blower uses a dedicated supply of 230 V, and this auxiliary voltage drives cooling airflow independently of main phase frequency so full torque is maintained at low speeds. Position reference comes from servo feedback (Heidenhain), giving sinusoidal encoder signals that the controller converts into speed and slip information. The winding code CS aligns copper fill and insulation with standard 400 V inverters.

Mechanical service features include standard bearings that handle the radial and axial loads common to belt drives. The rotor ends in a shaft with a whole parallel key, enabling positive torque transmission into hubs without backlash. Because there is no brake installed, actual stopping time depends on load inertia and drive deceleration settings, and systems requiring static holding must add an external brake module. Dynamic balance adheres to the R vibration severity level, limiting oscillation to protect connected equipment. The motor is shipped without a shaft seal, so additional protection may be needed in environments with oil or coolant spray.