Product Description:

The ADP104C-B05OB1-CS0H-A2N2 is produced by Bosch Rexroth Indramat within the ADP 3-Phase Induction Motors series. This asynchronous drive motor is intended for automated axes where a servo inverter regulates torque and speed. Position information is returned through Heidenhain feedback electronics, allowing closed-loop operation with precise current control. It is intended for coordinated motion applications that rely on the drive to regulate rotor current continuously during acceleration, steady running, and deceleration.

The housing is flange-mounted, allowing direct attachment to gearboxes or machine frames without base feet. This arrangement keeps the motor face aligned to the machine interface and avoids the need for separate foot-mounting hardware. The rotor turns on standard bearings suited to general-purpose load conditions. The output uses a smooth shaft, so couplings must clamp directly to the shaft surface rather than engage a keyway. Stator winding heat is removed by a separate blower powered by 230 V, which helps maintain temperature during extended duty cycles. The power terminals are located on the top of the frame. No brake is installed, so stopping torque must come from the inverter or external hardware. There is no shaft seal, so the machine must keep fluids away from the coupling area. Vibration is graded to severity level S for standard machine environments.

The motor has size 104 and length code C, which give it a medium active length and balance torque output with overall weight. Connection direction B places the cable exit toward the drive end of the motor. Internally, winding code CS identifies the winding set used by the matching drive tables. The control must use the corresponding resistance and inductance values during setup so the inverter applies the correct motor data.