Product Description:

The ADP104C-B05OA2-CS0H-C2N2 is an AC induction motor produced by Bosch Rexroth Indramat within the ADP 3-Phase Induction Motors series. As a three-phase machine, it converts electrical input into rotational motion suited for conveyor drives, packaging axes, and other continuous-duty automation tasks. When paired with a compatible inverter and feedback interface, it supports regulated speed control across a broad operating range and can be integrated into systems that require stable motor response under changing load conditions.

The housing uses flange mounting, so the motor seats directly against the driven machine frame without separate feet. Thermal management relies on an external blower circuit energized at 230 V, which helps keep winding temperatures within a safe operating range during sustained use. Position and velocity are returned to the drive through Heidenhain servo feedback, enabling closed-loop regulation down to standstill. The output end has a smooth shaft, which simplifies hub or coupling attachment where keyed torque transmission is unnecessary. To protect the front bearing from lubricant loss and airborne particles, the unit is supplied with a shaft seal.

Mechanical service life is supported by standard bearings sized for the motor’s radial and axial load envelope. Because there is no brake installed, holding torque must be provided externally when motion must stop under power-off conditions. Electrical terminations are routed through the top cover, with the power connection located at the top, while direction code A places the connector toward the drive end for straightforward cable runs. Frame designation 104 indicates the stator outer diameter and provides a clear reference for mounting clearance. The motor also uses vibration severity level S, a CS winding for compatible electrical characteristics, and length code C for the overall stack height and continuous torque range.