Product Description:

The ADP104C-B05OA1-CS0H-B2N1 is an asynchronous drive unit manufactured by Bosch Rexroth Indramat and assigned to the ADP 3-Phase Induction Motors series. It serves as a mains-fed motor for material-handling stations, indexing tables, and other automated equipment that demand stable torque across a broad slip range. By combining a cast housing with integral blower passages, the motor is intended for closed-loop operation when paired with Rexroth frequency inverters and feedback hardware.

Mechanical attachment to a machine frame occurs through a flange-mounted interface, and torque leaves the rotor through a shaft with a full parallel key. The active core diameter is coded as 104, while the overall length is listed under code C to moderate inertia without sacrificing power density. An external blower operating at 230 V moves air through the stator ducts to stabilize winding temperature. Position data returns to the drive through Heidenhain servo feedback, allowing precise regulation of slip and reactive current. Because the housing is supplied without a shaft seal, frictional losses are minimized in installations where environmental protection is already provided by the surrounding cabinet. Standard bearings carry radial and axial loads, and the design omits an internal brake so any holding requirement must be managed by the drive system.

The power lugs follow connection direction A, placing the terminal box on the motor’s top surface so conductors can route directly into overhead cable trays. Stator windings follow code CS, which indicates the conductor cross-section, insulation structure, and current density limits that the drive must observe. The assembly is balanced to vibration severity level R, keeping oscillation within a range that helps preserve bearing life and reduce transmitted motion to downstream gearsets.