Product Description:

The ADP104B-B05OB2-CS0H-D2N1 is a three-phase induction motor produced by Bosch Rexroth Indramat within the ADP 3-Phase Induction Motors series. It converts electrical energy into mechanical rotation for conveyor drives, packaging axes, and other continuous-duty applications inside automated lines where steady torque and controlled speed are required. As an induction motor, it is intended for machines that need durable rotary output during repeated production cycles. Standard bearings accommodate radial and axial loads typical of belt-driven assemblies, which supports common machine layouts.

The frame designation of 104 indicates the stator diameter and corresponds to the motor's mounting footprint, which helps match the unit to the required machine envelope. The B length code indicates the stack height used for the motor's continuous output range and overall axial length. Thermal management relies on an external blower supplied with 230 V auxiliary power, which removes heat without placing high voltage on the cooling circuit during operation. A flange-mounted interface lets the housing bolt directly to gearboxes or machine walls for rigid alignment without a separate foot arrangement. The CS winding code indicates the resistance and leakage reactance values used by compatible drives. Power conductors enter through a connector on top of the motor, and direction B routing helps organize cable runs in compact enclosures and overhead cable paths.

Position feedback is delivered through Heidenhain servo feedback, allowing closed-loop speed and position control without an external encoder assembly. The shaft uses a whole parallel key so couplings can transmit torque without slippage. It also comes with a shaft seal, which helps keep lubricant in while excluding contaminants. The motor meets vibration severity level R, permitting installation on frames that see moderate process-induced oscillation. The motor has no brake installed, so stopping torque must come from the drive or an external mechanical brake when the axis must stop under load.