Product Description:

The ADF160C-B05TA1-BS06-D2N1 is a main spindle motor manufactured by Bosch Rexroth Indramat for the ADF Main Spindle Motors series. It is a liquid-cooled asynchronous motor intended for continuous service on machine tools, printing presses, and other production equipment that need precise speed regulation. The unit couples to the drive train through a rigid flange interface, and its built-in position sensor supplies closed-loop feedback to the Indramat drive controller. Liquid cooling in the C-length housing helps maintain a stable operating temperature during high load cycles. It is suited to duties that require steady torque delivery and accurate speed control across changing process conditions.

Dynamic accuracy is supported by balance grade R DIN ISO 2373, which limits residual vibration during high spindle speeds. Mechanical integration is simplified because the motor uses flange mounting and a power entry through a connector plug that faces side A, while the connection housing is on the top of the frame. Motion control data is exchanged through digital servo feedback, allowing the controller to monitor rotor position in real time. The motor is supplied without a holding brake, so any static locking must be provided externally. Standard antifriction bearings and a standard coolant connection are installed for use with common closed-circuit cooling systems.

From a mechanical standpoint, the motor belongs to size 160, giving it a stator diameter suited for mid-range spindle outputs. The output shaft is a shaft with keyway and is balanced with a full key to limit residual unbalance during rotation. A shaft seal ring is fitted to help keep coolant or cutting fluid out of the bearing chamber. The opposite end of the rotor is open because the model does not include a second shaft end. Electrical behavior is matched to winding code BS, which corresponds to the motor's current and speed characteristics for the connected drive.