Product Description

The ADF160B-B05TB1-BS03-A2N3 spindle motor is one of the most recent productions of Rexroth Indramat. The spindle motor is renowned for its ability to rotate at various speeds depending on the command it receives from the spindle controller. The spindle motor communicates and exchanges signals with other components of the servo system through its high-resolution motor feedback cable. Unlike the most conventional spindle motors, the ADF160B-B05TB1-BS03-A2N3 main spindle motor can also function as a servo drive in industrial applications. The spindle shaft of the spindle motor can rotate at a speed as low as 1500min^-1 and as high as 6000min^-1. It can comfortably operate in many industrial machines with different speed and power output requirements. The ADF160B-B05TB1-BS03-A2N3 spindle drive is particularly favored by industrialists that use NC controlled machines since it delivers accurate control and has an extended service life of up to 20,000 hours.

The ADF160B-B05TB1-BS03-A2N3 is one of the most powerful spindle motor produced by Indramat. Because it rotates at a very high speed, it generates a large amount of frictional heat. It uses a special lubricating liquid to both controls its temperature and reduces its shaft friction. It is installed as per the B05 installation requirement; that is, it can be installed according to IM B5, IM V1, and IM V3 installation orientations. It uses a plain shaft without a shaft sealing ring and is designed without a side B shaft end. Operators should note that the spindle motor has no holding brake to retain load during standstill or emergency stops.

The ADF160B-B05TB1-BS03-A2N3 spindle motor is extremely efficient; it uses a continuous current of 102 Amperes to generate a power output of 40 Kilowatts. The spindle motor weighs 206 kilograms and can operate optimally at ambient temperature within the range of 5 to 45 degrees Celcius. This unit can be shipped globally with a one-year warranty period from Wake Industrial.