Product Description

The ADF104C-B05TA1-BS06-A2N2 from Bosch Rexroth is an asynchronous motor which is liquid cooled. The inlet / outlet for the coolant is provided on the side B of the motor. The ADF104C-B05TA1-BS06-A2N2 should be installed when it is cold and is disconnected from the power supply. Appropriate lifting equipment and personal protective equipment and clothing should be used during motor transport. Lifting or movement of the motor by or at the fan unit must be avoided. Borehole for the flange mounted ADF104C-B05TA1-BS06-A2N2 should have a diameter of 14 millimeters. The M12 screws used for mounting should be tightening with maximum 87 Nm tightening torque. Electrical connections should be made after the motor has been properly assembled. Bosch recommends use of ready-made power cables which are supplied by Rexroth Indramat and are certified by UL / CSA.

Power connection on the ADF104C-B05TA1-BS06-A2N2 is on the motor top and connection direction is towards side A. The motor length and size are C and 104 respectively. Shaft on the motor is plain and does not include sealing ring. The motor comes with deep-grove ball bearings and supports digital servo feedback. Holding brake is not part of the standard motor package but can be ordered separately. Shipping weight of the ADF104C-B05TA1-BS06-A2N2 is 70 kilograms. Diameter of the motor is 192 millimeters and its length is approximately 509.5 millimeters. Maximum and rated speeds for the ADF104C-B05TA1-BS06-A2N2 are 9000 RPM and 4200 RPM respectively. Rated torque, power and current for the motor are 38 Nm, 16.7 kilowatts and 47.4 Amps. Continuous current and continuous torque at standstill are 65.5 Amps and 60 Nm.  Minimum recommended cross section of power wire used for the motor is 16 mm². This unit can be shipped globally with a one-year warranty period from Wake Industrial.