Product Description

2AD100C-B05OA1-AS13/S005 is an asynchronous servo motor. Asynchronous motors are those for which the shaft speed and input current frequency are not in synch. On the other hand, synchronous motors are those whose shaft speed is in synch with the frequency of input current. Compared to synchronous motors, asynchronous motors have a simpler design, deliver higher efficiency, and support a wide range of applications that don’t require accurate speed control. One characteristic of asynchronous motors is slip, which is the difference between the shaft speed and the speed of the rotating magnetic field. The 2AD100C-B05OA1-AS13/S005 is motor that supports high-resolution feedback. This allows its use with a servo drive controller. The motor is equipped with an electrically engaged holding brake that utilizes an electromagnetic force to hold or stop the motion of the motor shaft.

Specifications for the brake include 1.5 kilograms weight, 50 milliseconds release delay, 50 milliseconds clamping delay, 30 Nm holding torque, 24 Volts DC terminal voltage and 0.9 Amps nominal current. The brake is a safety device used for preventing accidental shaft rotation.  The 2AD100C-B05OA1-AS13/S005 motor supports surface cooling. It comes with a factory-installed axial blower. Supply requirement of the blower is 230 Volts AC. Average air volume produced by the blower on an hourly basis is 230 m³/h. Power connector on the motor is located on the top side and points toward side A of the housing. Bosch has designed the motor for flange mounting. Bosch industrial products must only be handled by trained personnel. Only accessories approved by Bosch should be used. The product manual lists relevant safety precautions. Operators must understand and follow these precautions to prevent injury and equipment damage.