Product Description:

The 2AD280A-B03RL1-AS06-B2V1 is an AC induction motor produced by Bosch Rexroth Indramat and assigned to the 2AD 3-Phase Induction Motors series. This three-phase machine converts electrical energy into constant-speed rotational motion for conveyor lines, packaging modules, and other motion axes in automated plants. When paired with a compatible drive, it supplies steady torque for continuous-duty operation and supports demanding industrial cycles that require reliable rotary output. Its induction design is well suited for applications that need stable mechanical performance over long operating periods.

Mechanically, the motor uses frame size 280, which provides a large stator diameter for higher torque capacity. The length code A indicates the shortest stack in this frame, helping reduce axial space requirements. Cooling is handled by an axial blower mounted on the housing, and the forced airflow removes heat so the machine can run at nominal load without derating. Position feedback is delivered through digital servo feedback, allowing the drive controller to close velocity and position loops accurately. The housing is prepared for foot mounting, so the base sits directly on a machine bed and transfers operating forces through the motor feet.

Electrical connections enter through a junction box located on the right side of the frame when viewed from the shaft end, while the conduit opening faces left to simplify cable routing in compact enclosures. The motor is supplied without a holding brake, so any static load must be secured by drive torque or an external brake. A vibration grade of R permits installation where moderate dynamic forces are present without exceeding ISO balance limits. The stator uses winding code AS, matching the motor to drives that provide the proper voltage and frequency for this impedance set. Side B has no shaft end, and the design omits a shaft seal to reduce friction at the output end.