Product Description:

The 2AD225C-B35RR2-AS06-D2N1 belongs to the 2AD 3-Phase Induction Motors series from Bosch Rexroth Indramat. It is an AC induction motor intended for continuous rotation tasks in industrial automation, where electrical energy is converted into mechanical shaft power for machine tools, material-handling axes, and packaging equipment. Its product type, construction format, and frame geometry allow it to be paired with a matching drive controller within the same platform.

The motor relies on an axial blower for forced-air cooling, moving air along the housing to keep temperature within the insulation limits. Closed-loop operation is achieved through digital servo feedback, which returns position and speed information to the inverter for vector control. Frame size 225 gives the motor a 225 mm stator diameter that supports its torque range, while length code C indicates the active stack depth. Because the unit is supplied without a holding brake, any load that must remain stationary during power-off needs external securing. Installation flexibility is provided by flange and foot mounting, so the same model can be bolted either to a base plate or to a gearbox face. Standard bearings handle combined radial and axial forces, and balanced rotating parts help keep vibration within the intended operating range.

Electrical terminations are grouped inside a right-hand junction box, and the power leads enter from the right to match the stated connection direction. The drive end uses a balanced-key shaft with a shaft seal, which helps prevent lubricant loss and minimizes unbalance from the keyed coupling. Vibration grade R limits peak vibration amplitude to values compatible with precision machining equipment. Winding code AS indicates the stator conductor cross-section and insulation system used for general-purpose duty cycles, and the rear face is made without a shaft end so the motor can mount flush against ancillary equipment.