Product Description:

The 2AD225C-B35RA1-AS03-B2V1 is an AC induction motor built by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. As a three-phase drive element, it converts electrical power into rotational motion for conveyors, tooling spindles, and other industrial axes that require continuous torque. Its three-phase design makes it suitable for production equipment that needs stable rotary output over long operating periods. The C-length housing and size-225 stator frame provide the dimensional envelope, while the power leads are routed toward Side A so the connection hardware stays clear of adjacent equipment.

This motor is fitted with heavy-duty bearings to support radial and axial loads during long duty cycles. Heat generated in the windings is removed by an axial blower that forces air along the frame, maintaining temperature without external cooling equipment. Installation is flexible because the casting includes provisions for flange and foot mounting, and either method aligns the shaft centerline without additional brackets. The size code 225 indicates the stator diameter used for this frame. Mechanical balance is set to vibration grade R, helping the machine meet tight displacement limits when operated at nominal speed.

Closed-loop positioning is possible through the integrated high-resolution motor feedback device, which feeds precise rotor angle data to the drive controller. The assembly is supplied without a holding brake, so external means must secure vertical loads when power is off. Incoming conductors land in a junction box mounted on the right side when facing the shaft, which matches the specified connection position and eases cable routing inside panels. Internal copper details follow winding code AS, which indicates the resistance and inductive reactance used for compatible inverter settings. Additional mechanical notes include the absence of a shaft end on side B, the lack of a shaft seal on the drive side, and dynamic balance with the complete key installed.