Product Description:

The 2AD225C-B35OR1-AS07-B2N1 is a motor produced by Bosch Rexroth Indramat and belongs to the 2AD 3-Phase Induction Motors series. As an electronically controlled drive element, it supplies regulated torque and speed to conveyors, presses, and other automated station axes that rely on asynchronous rotor technology. The unit interfaces with Rexroth servo inverters to convert commanded frequency changes into mechanical rotation, making it a common choice for demanding industrial automation cells.

Cooling is handled by an Axial Blower, which pushes air along the stator body so the motor can sustain rated current without external ducting. Position and speed information is returned through digital feedback with a multiturn absolute encoder, enabling the drive to detect shaft location over multiple revolutions without battery backup. Installation flexibility is provided by flange and foot mounting, allowing either end-shield or base engagement with the machine frame. The frame corresponds to motor size 225, giving a large diameter stator for higher continuous power. Electrical terminals are collected in a top-oriented junction box, and the conductors exit to the right so wiring can stay clear of coolant or chip paths.

The 2AD225C unit is delivered without a holding brake, so axis immobilization during power-off must be supplied externally when vertical loads are present. Mechanical balance is maintained at elevated speeds because the rotor is trimmed to vibration grade R, and it uses standard bearings for general-purpose duty cycles. Winding designation AS identifies the conductor gauge and insulation scheme used in this motor, and the C length provides a medium stator stack within the frame. For sealing, the shaft is manufactured without a shaft seal and is balanced with its full key, reducing drag when the motor is coupled to enclosed gearboxes or belt drives.