Product Description:

The 2AD225C-B35OB1-AS07-C2N1 is an AC induction motor built by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. Designed as a drive element for industrial automation, it converts three-phase mains power into constant torque for machinery such as extruders and gantry axes. The 225 frame and C length code indicate its mechanical envelope and active core depth, allowing integration where higher breakaway torque is needed without increasing motor diameter. Standard bearings support radial and axial loads, and winding code AS matches the stator to conventional 50/60 Hz inverter outputs.

Thermal management is provided by an axial blower mounted on the housing, forcing air along the stator fins to keep temperature within class F limits during continuous duty. Rotor position and speed are relayed through digital feedback with a multi-turn absolute encoder, enabling closed-loop control over large travel ranges without homing. The motor uses flange and foot mounting, so it can be installed on a flange, on feet, or both. Power enters through a junction box that simplifies line terminations and seals the wiring compartment. For applications that stop under drive torque alone, the unit is delivered without a holding brake, so no residual drag is introduced when the shaft is released.

Mechanical output is delivered by a smooth shaft with a shaft seal that helps exclude contaminants while permitting direct coupling, and the opposite face is specified without a shaft end to minimize overhung mass. Mains conductors emerge from the enclosure at the top, and the outlet is oriented to side B, allowing short cable runs when the drive cabinet is beside the motor. The vibration behavior complies with vibration grade R, supporting installation on flexible frames without secondary damping.