Product Description:

The 2AD225C-B35OB1-AS07-A2N1 is a three-phase induction motor produced by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series. It is engineered to convert electrical power into torque for positioning or continuous-duty drives within automated machinery such as printing lines, packaging stations, and material-handling axes. The unit draws current from a matched inverter and returns speed data through an integrated encoder so that the controller can close the velocity loop without external sensors. This arrangement supports stable response during speed changes and helps the drive maintain controlled motion under varying load conditions.

Frame geometry follows motor size code 225, while the active stack corresponds to length code C, giving a balanced ratio between torque output and overall mass. Heat is carried away by an axial blower that directs cooling air along the stator ribs, allowing continuous loading without excessive winding temperature. Mechanical interfaces include flange and foot mounting, so the machine can be secured either to a face plate or a base rail. Power conductors enter through a top-mounted junction box and exit toward side B, which keeps cable trays clear of the driven shaft. The motor is supplied without a holding brake.

Position data originate from the integrated multi-turn absolute encoder that forms part of the digital feedback system, eliminating the need for homing after power cycles. The rotor transmits torque through a smooth shaft without a shaft seal, and there is no secondary shaft end on side B, simplifying connection to gearboxes or couplings. Dynamic behavior meets vibration grade R, confirming that residual imbalance stays within limits for rigidly mounted equipment. Electromagnetic characteristics are indicated by winding code AS, which matches the motor to compatible drive parameters. Standard bearings support the rotor, and the internal cooling fan maintains axial airflow during operation.