Product Description:

The 2AD225C-B35OB1-AS06-D2V1 is an AC induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. The unit is intended for constant-speed drive tasks in packaging lines, material-handling axes, and machine-tool spindles where three-phase mains are available. By pairing a squirrel-cage rotor with a dedicated controller, the motor delivers reliable torque generation and allows the broader automation system to regulate speed through the inverter while the machine executes its mechanical process. It can be used where process equipment needs stable motor output and the connected drive manages the speed loop.

Mechanical endurance is supported by heavy-duty bearings that accommodate continuous radial and axial loading common in belt-driven assemblies. Thermal management is handled by an integral axial blower; the airflow removes stator heat and maintains winding temperature below the insulation limit during prolonged duty cycles. Position and speed data are returned through digital servo feedback, enabling closed-loop regulation by the drive controller without external encoders. The frame follows size code 225, giving a stator diameter and power density suited for medium-to-high power ranges. The motor uses flange and foot mounting, so it can be secured either to a baseplate or directly to a machine housing.

The electrical interface is routed on side B, and the supply conductors terminate in a top-mounted junction box that simplifies cable entry in crowded cabinets. Top cable access also helps keep conductor routing clear of nearby machine structures. Dynamic balance is certified to vibration grade R, which helps support smoother operation in spindle applications when a shaft seal and full-length key are installed. Winding code AS matches compatible inverters for nominal voltage and current. The omission of a holding brake and the absence of a shaft end on the non-drive side reduce inertia at the driven end and leave the output arrangement simpler.