Product Description:

The 2AD225C-B35OB1-AS06-B2V1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. It converts three-phase power from a matched inverter into mechanical rotation, driving conveyors, presses, and packaging axes at commanded speeds. Size code 225 and length code C identify the stator stack and frame envelope, placing this model in the mid-torque range used in many general-purpose machines. The design follows a modular concept so that mounting hardware, power terminations, and feedback options can be matched to the application during system build.

The motor incorporates heavy-duty bearings that support elevated radial and axial loads while extending lubrication intervals. Thermal control is provided by axial blower cooling; the integral fan forces air over the housing to dissipate heat generated during continuous duty. Rotor position is communicated through digital servo feedback, allowing the drive to regulate speed and torque with high resolution. Because the unit is supplied without a holding brake, any required static torque must be furnished by the inverter or an external brake module when power is off. The shaft is furnished without a shaft seal and is factory balanced with its full-length key installed, so external sealing or protective covers are needed where fluid exposure is expected.

The motor uses flange and foot mounting, which permits either base or face attachment without extra adapters. Power conductors use a junction box power connection that sits on the top of the housing and is oriented toward side B, keeping cabling clear of the drive end. The stator windings use winding code AS, matching the impedance and thermal limits expected by standard Indramat drives. Rotor balance meets vibration grade R, limiting displacement and bearing wear in high-speed service. The non-drive end is left without a shaft extension, providing space for additional fans or feedback devices when required.