Product Description:

Bosch Rexroth Indramat manufactures the 2AD225C-B35OB1-AS06-A2V1 as part of the 2AD 3-Phase Induction Motors series. The unit is an AC induction motor intended for machine tools, packaging lines, and other automated stations where continuous three-phase torque is required. By converting electrical energy into rotational motion, it drives belts, screws, and spindles in closed-loop industrial processes. In operation, it provides steady rotary output for applications that need repeatable motor response during long production cycles.

This model is fitted with heavy-duty bearings to handle sustained axial and radial forces during continuous duty. The frame uses motor size code 225, while the C length code provides the stack length needed for its power class without changing the mounting face. The housing supports flange and foot mounting, allowing installation in horizontal or vertical machine layouts. On the drive side, the motor uses a smooth shaft without a seal, which simplifies coupling to matching hubs or shrink discs, and the opposite end has no shaft extension. Dynamic balance is held to Vibration Grade R, helping reduce transmitted vibration at higher operating speeds.

Thermal management relies on an axial blower mounted at the rear, which forces air along the stator and helps remove heat from the housing during continuous operation. For position and speed regulation, the motor integrates digital servo feedback, allowing the connected drive to monitor rotor movement without a separate external encoder assembly. The design is supplied without a holding brake, so any load that must remain fixed at standstill requires a machine-side holding method. Power enters through a sealed junction box mounted on top of the housing, with the conduit routed toward side B to keep wiring organized around nearby machine components. This arrangement also leaves clear access to the connection area and helps separate power cabling from moving parts.