Product Description:

The 2AD225C-B35OB1-AS03-D2V1 is an AC induction motor produced by Bosch Rexroth Indramat and assigned to the 2AD 3-Phase Induction Motors series. Designed for machinery that demands continuous torque and precise velocity control, the unit converts electrical power into rotational motion for automated axes and spindle drives in industrial automation. In automated production cells, it operates as the primary mover for gearboxes or direct-drive shafts, where stable speed control and continuous-duty performance are required for repeated machine cycles.

Its mechanical frame corresponds to size code 225 and length code C, giving the motor a large stator section for substantial torque production within this frame class. Load-carrying capacity is supported by heavy-duty bearings that are intended for elevated radial and axial forces. Thermal management relies on an axial blower mounted to the housing, and the forced airflow helps remove heat from the windings during continuous operation. Accurate closed-loop operation is achieved through high-resolution motor feedback integrated at the non-drive end, allowing the drive controller to read fine position changes. The rotor is balanced with a full key, and a shaft seal helps keep lubricant in while limiting contaminant entry.

Installation flexibility is provided by flange and foot mounting, so the motor can be secured on vertical or horizontal machine frames. Three-phase leads enter through a junction box mounted on the top of the housing, and the designated cable entry direction is Side B to help keep wiring clear of moving parts. The winding code AS identifies the coil set used for this motor configuration, allowing the connected drive to use the proper electrical data. The motor is supplied without a holding brake, and it has no shaft end on the B-side, which suits applications that use only the drive-end output.