Product Description:

The 2AD225C-B35OB1-AS03-D2N1 belongs to the 2AD 3-Phase Induction Motors series produced by Bosch Rexroth Indramat. Designed as the prime mover in automated line shafts, material-handling equipment, and general industrial drives, the unit delivers three-phase torque from a compact IEC frame. It can be used for constant-speed duty or with inverter control, allowing the motor to drive gearboxes, couplings, rollers, pumps, and similar rotating loads in coordinated machine processes.

The motor uses size code 225, and length code C provides the active stack needed for higher continuous torque in this frame. It supports flange and foot mounting, so the housing can be attached directly to a machine face or secured to a baseplate. Electrical power enters through a junction box power entry, and the conduit plate is positioned on side B of the housing to keep cable routing on one face. The terminal box is mounted on top of the stator, which helps keep lead routing compact. Only side A has a shaft extension, and that shaft is keyed, sealed, and balanced for industrial power transmission.

The thermal system uses axial blower cooling, which pushes air through the ribbed frame to keep winding temperatures within the Class F range used for this motor. Speed and position signals are provided by high-resolution motor feedback, allowing the connected drive to manage closed-loop control without a separate external encoder. The motor is supplied without a holding brake, so idle loads must be secured by mechanical locking or by the drive system when required. It also meets vibration grade R, and standard bearings support radial loads during continuous operation. Because there is no shaft extension on side B, the motor has less overhung mass at that end, while the shaft seal on side A helps protect internal lubricant from coolant spray.