Product Description:

The 2AD225C-B35OA1-AS06-H2N1 is a three-phase induction motor produced by Bosch Rexroth Indramat and supplied in the 2AD 3-Phase Induction Motors series. It is intended for continuous duty in automation lines where fixed-speed spindles, pumps, or fan loads must be driven from standard line power or an inverter supply. Within those systems, the motor acts as the primary electromechanical transducer, converting electrical energy into the torque needed by conveyors, machine tools, and auxiliary plant equipment. Its mechanical design integrates a cast-iron frame with standard bearings to support radial and axial loads typical of industrial machinery.

The motor’s cooling is handled by an axial blower, which forces air along the housing to keep the stator windings within their thermal limits during prolonged full-load operation. Position data is returned through digital servo feedback, allowing the companion drive to monitor speed and slip without external sensors. The housing supports flange and foot mounting, so the same frame can be installed on horizontal base plates or vertical end shields. Electrical power reaches the stator windings through a junction box located on the top of the frame, and the terminal chamber faces Side A to simplify cable routing.

The motor size code is 225, and the length code is C, indicating a large frame with a long active core in the series. Dynamic stability is improved by internal rotor balance that meets vibration grade R, and the shaft uses a seal and half key to minimize leakage and ease coupling alignment. The electromagnetic profile uses winding code AS, matching the stator impedance to standard 400 V class drives. The motor is delivered with standard bearings, without a holding brake, and with no shaft extension on the B-side, reducing overhung mass on auxiliary equipment.