Product Description:

The 2AD225C-B35OA1-AS06-C2N1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. Intended for industrial automation, the motor converts three-phase electrical power into continuous rotary motion for machine tools, printing lines, and material-handling equipment. Designed for installation on combined foot-and-flange interfaces, the unit fits standardized mechanical envelopes across the 2AD range while maintaining the same shaft height and coupling geometry.

It is supplied without a holding brake, so any load holding must be handled externally. Forced ventilation is delivered by an axial blower mounted on the non-drive end that pushes air along the stator, improving thermal dissipation during continuous duty. Rotor position and speed are reported through digital servo feedback, enabling the drive controller to perform closed-loop regulation with high accuracy. Mechanical integration is supported by flange and foot mounting surfaces that share common datum planes, allowing the motor to be bolted either to a vertical face or to a baseplate. Power conductors terminate in a sealed junction box, separating mains wiring from control and feedback leads.

The frame uses size code 225 and length code C, giving the stator core substantial continuous-output capacity while keeping the motor within a familiar installation class. The steel shaft exits on the drive end as a smooth shaft with a shaft seal, which helps block dust at the bearing seat and limit lubricant escape. Mains cables route on side A, and the junction box is positioned at the top, permitting downward conduit runs that can clear nearby coolant or hydraulic pipes. Dynamic behavior matches machines that specify vibration grade R, which supports stable operation in general-purpose production lines.