Product Description:

The 2AD225C-B35OA1-AS06-B2V1 is a three-phase AC induction motor manufactured by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. Within an automation cell, it serves as the rotary prime mover that drives spindles, pumps, or travel axes wherever constant-speed or inverter-controlled operation is needed. A motor length C stack in a 225 frame supplies the torque density required for medium to large machinery while remaining compatible with standard digital drive platforms. This configuration is commonly used where a drive must regulate acceleration, deceleration, and steady running across changing process loads.

The mechanical envelope is supported by heavy-duty bearings that absorb continuous radial loads from belts or gearboxes. Installation flexibility is provided by flange and foot mounting, so the housing can bolt to a base plate or the face of a machine bed without adapters. Power conductors enter through a junction box on the motor’s upper surface. Its terminals face side A, and the cable exit is on the top to clear floor obstructions. A keyed shaft is supplied without a shaft seal and is dynamically balanced with the complete key to minimize coupling vibration. The rear side has no shaft end, allowing closer placement to walls or tension devices.

Thermal management relies on an axial blower, which forces ambient air along internal ducts and keeps winding temperatures within class limits even during heavy cycles associated with winding code AS. Speed and position data are returned through digital servo feedback, enabling closed-loop control by Indramat drives without external encoders. No holding brake is included, so static load retention must be handled by the drive or a mechanical latch. This arrangement suits machines that already use external braking hardware or torque-based holding during stops. The motor meets vibration grade R, indicating reduced displacement levels that help protect adjacent sensors.