Product Description:

The 2AD225C-B35OA1-AS03-D2V1 belongs to the 2AD 3-Phase Induction Motors series produced by Bosch Rexroth Indramat. As an AC induction motor, it converts three-phase electrical power into constant torque for pumps, conveyors, and other motion axes in industrial automation lines. The part is designed for use with drive controllers that modulate frequency and current, allowing speed regulation without mechanical gearing. A suitable drive can also maintain stable operation across changing process demands.

Mechanical endurance starts with heavy-duty bearings, selected to support radial and axial loads common in overhung belt or pulley arrangements. Thermal management is handled by an axial blower, so forced air moves through the frame and keeps winding temperature within limits. Signal accuracy comes from high-resolution motor feedback, enabling the drive to interpolate fine position increments for closed-loop control. The motor uses motor size code 225 and motor length code C, giving it the torque density associated with this frame. Its flange and foot mounting layout allows either base or face installation. Power conductors exit on Side A, the terminal position is on top of the housing, and the drive-end shaft is sealed and balanced with a full key to reduce runout.

The motor is supplied without a holding brake, so braking torque must come from the driven machine or an external module after power removal. Mains wiring passes through a junction box for power entry, which provides a protected connection point for incoming power leads. Dynamic performance meets vibration grade R, helping limit displacement during continuous duty at rated speed. Winding code AS identifies the electrical characteristics matched to the corresponding 2AD drive parameters. The non-drive end has no shaft extension, which leaves the motor with a single usable output shaft.