Product Description:

The 2AD225C-B35OA1-AS03-C2N1 is an AC induction motor produced by Bosch Rexroth Indramat and supplied within the 2AD 3-Phase Induction Motors series. It functions as the rotary prime mover in automation lines, driving pumps, conveyors, or machining spindles where constant torque and straightforward inverter control are required. The motor’s three-phase stator design works with standard frequency converters, making it suitable for repetitive duty in packaging, material handling, and metal-cutting equipment. Its layout supports industrial applications that need dependable rotary motion in continuously cycled machinery.

Cooling is delivered by an axial blower, so airflow runs parallel to the shaft and removes heat from the frame during continuous duty. Position and velocity are monitored through high-resolution motor feedback, allowing the drive to maintain closed-loop control without an external encoder. The stator and housing correspond to motor size 225, giving the motor a large electromagnetic section for higher output capacity. Installation flexibility is provided by flange and foot mounting, so the same unit can be bolted to a base or attached directly to connected equipment. The motor is supplied without a holding brake, so stopping or load retention during power-off conditions must be handled by the system.

The output uses a smooth shaft with a shaft seal, which helps keep lubrication inside while limiting contaminant entry at the bearing area. Power enters through a junction box mounted on side A, and the top cable exit supports straightforward routing into the cabinet. The rotor balance follows vibration grade R, which helps limit oscillation during higher-speed operation. The motor has length code C and winding code AS. It also uses standard bearings, and there is no shaft end on side B.